Agilent Technologies N9913A User Manual page 207

 With Option 307, GPS is available with the built-in receiver accessed through
 Without Option 307, GPS is usable ONLY with an external GPS receiver that is
How to make GPS settings
GPS settings are the same with, or without, Option 307.
 Your GPS settings can be saved with Preferences. Learn more on page 204.
 Press System 7
 Then
 Then
 Then choose from the following:


 When Internal or External is selected, a search is made for satellites overhead.
System Settings
the top-panel SMA (f) connector. This connector has a 3.3 VDC bias voltage
which is switched ON when GPS is set to Internal. This system is designed for
use with an active antenna such as the Agilent N9910X-825.
shipped with Microsoft "Streets and Trips" and "AutoRoute". The GPS receiver
is NOT available from Agilent. Only the GPS USB receiver is used with the
FieldFox. Therefore, it is NOT necessary to purchase the very latest version of
the map software.
System Configuration
GPS
Enable and disable the GPS display on the FieldFox main
Display ON OFF
window.
GPS
- Disable GPS (default setting).
OFF
o
- Enable GPS using an external, customer-supplied, USB dongle
External
o
device. A check is made to detect a USB GPS device at the USB connectors.
- Enable GPS using Option 307 – Built-in GPS. Connect a GPS
Internal
o
antenna to the top-panel GPS connector. Learn more about additional GPS
antenna accessories at
automatically when Frequency Reference Source is set to GPS. Learn more
on page 209.
GPS works best when outdoors and in full view of the open sky. When several
satellites are found, the following screen appears (when Display is set to ON)
and is updated frequently:
http://www.agilent.com/find/fieldfox. Internal is set
207