Printing - Agilent Technologies N9913A User Manual

Printing

The current screen or selected files can be printed using a PCL-compatible
printer (like older HP Deskjet printer) connected to one of the FieldFox USB
ports. Newer PCL3GUI photo and all-in-one printers are NOT supported.
Measurements can also be printed using the FieldFox Data Link software.
How to print the current screen or a saved file.
To save ink, first select an outdoor (white background) display color. Learn how
on page 201.
 First, to see the Print menu connect the printer to a FieldFox USB port.
 Then press Save/Recall 9
 Then



File Management
Print and choose from the following:
Printer and Page Setup
configured properly. The Status line should read "Ready'.
Make other print settings as desired.
o
Select Files for Printing
stored on the Internal drive. Images can NOT be printed from the USB and SD
card.
Edit the Quick Settings table to select up to FOUR Rows and FOUR Columns
o
for up to 16 total images to be printed on a single page.
If necessary, edit the filenames to be printed.
o
Select Done. Then Print Selected Files
o
– Immediately prints the FieldFox screen using the
Print Current Screen
selected Printer and Page Setup settings.
- Confirm that that printer is connected and
- Print up to 16 *.PNG images on one page that are
to begin printing.
197