See Also; Working With The Lithium-Ion Battery - Agilent Technologies N9913A User Manual

Fieldfox analyzers
Hide thumbs Also See for N9913A:
Table of Contents

Advertisement

Working with the Lithium-Ion Battery

In this Chapter
Viewing Battery Charge Status .......................... 216
Charging the Battery ........................................... 217
Reconditioning the Battery ................................ 219
Battery Care ......................................................... 220
Maximizing Battery Life ..................................... 220
Battery Disposal................................................... 221

See Also

Installing the Battery ............................................ 11
Conserving Battery Power ................................... 11
Battery Safety Considerations........................... 225
Viewing Battery Charge Status
 Icons in the upper right of the front panel screen.
 Battery screen - select System then
 Built-in battery gauge. Learn more in the following section.
Front Panel Icons
Service Diagnostics – Battery Screen
The Battery screen displays the following information. To access the screen,
select System then
Additional battery information is available using SCPI commands.
1. Status – Fully charged, No battery, Charging, Empty, or Discharging.
2. External DC Supply – True or False indicates if an external DC supply is
3. Battery Present – True or False indicates if a battery is installed.
NOTE
Items 4 through 8 are read directly from the battery. The information is based on
the battery's internal sensors and memory.
4. Voltage – measured by the battery's sensor.
216
You can view the battery charge status in the following ways:
Icon
Status
Connected to external power through the AC/DC adapter. Battery installed
and charging. The amount of charge is indicated by the number of bars
shown.
Battery not charging with 84% battery life remaining.
Battery fully charged. A fully charged battery MAY NOT read 100%. Learn
more on page 219, Reconditioning the Battery.
Service Diagnostics
connected.
then Battery.
Service Diagnostics
then Battery.
FieldFox User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents