Agilent Technologies N9913A User Manual page 35

How to Edit a Cable File
The FieldFox includes many predefined cable files with the manufacturer's
specifications. You can edit these files or create new cable files using the
following procedure or using the FieldFox Data Link Software.
The Cable correction data survives a Mode Preset and Preset.
With a DTF measurement present:
 Press Meas Setup 4
 Then
 Then
 Press
 Then
 Then use the ▲|▼ arrows to select a field,
 Optionally choose from the following:
 Press
How to Save or Recall a Cable
 Press
 Press

About Cable files
 Cable files are saved to, and recalled from, the Cables folder. If the folder does
DTF (Distance to Fault) Measurements
DTF Cable Specifications
Edit/Save/Recall Cables
then to clear all data from the existing DTF Cable table and
New Yes
reset header information to default settings.
to open the Cable Editor.
Edit Cable
When editing Cable Description information, press
o
selected field using the FieldFox labeler.
When editing Frequency/Loss pairs, enter numbers using the numeric
o
keypad, then select a frequency suffix. Then Enter. Learn more about "How
the Freq/Loss pairs are applied" below.
Previous / Next Page
o
Add a blank Freq/Loss pair to the table,
Add Data
o
then:
Delete/Clear
o
Remove the selected Freq/Loss pair from the table.
Delete Line
o
then Remove all Freq/Loss pairs from the table and resets
Clear All Yes
o
header information to default settings.
to close the Cable Editor.
Done
to saves your changes to the specified Storage Device. Enter
Save Cable
a filename using the FieldFox labeler (learn more on page 190). Learn more
about Cable files below.
to load a Cable file from the specified Storage Device.
Recall Cable
Changes the device used to save or recall Cable files. This is a
Storage Device
different setting from the Save/Recall Storage Device setting. Choose from
Internal (default setting), USB (must be connected) or SD card.
not already exist on a USB or SD card, it is created automatically before
storing the file.
Quickly scrolls through pages of Freq/Loss data.
then modify the
Edit
35