Agilent Technologies N9913A User Manual page 148

 Then choose from the following:
Limits
In Power Meter Mode, Minimum and Maximum limits set a visible range of
acceptable readings between these two values. Readings that are below the
minimum or above the maximum are clearly visible on the power meter display.
How to set Limits
 Press Limit 8.
 Then choose from the following:
148
ON Enables step detection (default setting)
o
OFF Disables step detection
o
Toggles the display of the Minimum limit ON and OFF.
Min Limit On Off
o
Min Limit Value Sets the Minimum limit power value. Power reading lower
o
than this will exceed the limit.
Max Limit On Off Toggles the display of the Maximum limit ON and OFF.
o
Sets the Maximum limit power value. Power reading
Max Limit Value
o
higher than this will exceed the limit.
FieldFox User's Guide