Table of Contents
Advertisement
Chapter 8
8
ROUTINE MAINTENANCE
This chapter explains how to keep the machine operating smoothly, including viewing copy count/scan count/the
toner level indicator, cleaning the machine and resetting the network settings of the machine.
CHECKING THE TOTAL OUTPUT
COUNT AND TONER LEVEL
CHECKING THE TOTAL OUTPUT COUNT
When "Auditing mode" is "ON":
From the "- - -" display, you can check the total output count, total copy count, and total scan count as explained
below.
When "Auditing mode" is "OFF":
From the "
0" display, you can check the total output count, total copy count, and total scan count as explained
below.
The total output count is all pages (for both printing and copying) printed by the machine and the total output count
can be counted up to 999,999.
Total output count
Hold down the [0] key.
Example: Total number of pages output is 12,345.
• Each A3 (11" x 17") size page is counted as
Note
two pages.
• During a copy run, pressing the [0] key
shows the number of completed copy
pages, not the total output count.
122
The total output count
appears sequentially in
two parts while you hold
down the [0] key.
Total copy count
Hold down the [READ-END] key ( ).
The total number of pages printed in printer
Note
mode can be calculated by subtracting the
total copy count from the total output count.
Total scan count
Hold down the [ ] key.
The total copy count
appears in the number of
copies display while you
hold down the key.
The count display and
counting method are the
same as for the total
output count.
The total scan count
appears in the number of
copies display while you
hold down the key.
The count display and
counting method are the
same as for the total
output count.
Advertisement
Chapters
Table of Contents
Troubleshooting
