Vacuum System Components
The parts of the vacuum system are identified in
• Foreline (rough) pump
• High vacuum pump (diffusion or turbo pump)
• Analyzer chamber
• Side plate (analyzer door), and front and rear end plates
• Vacuum seals
• Calibration valve(s) and vent valve
• Vacuum control electronics
• Vacuum gauges and gauge control electronics
Each of these is discussed in more detail in this chapter.
Micro-Ion vacuum gauge (if present)
CI flow control
Vent valve
Analyzer chamber
GC/MSD interface
High vacuum pump
High vacuum pump
cooling fan
Hose to foreline pump
Figure 34
Example vacuum system components (MSD with turbo pump shown)
5975 Series MSD Troubleshooting and Maintenance Manual
Vacuum System
Figure
34.
6
173