Local Control Panel and Power Switch
Local Control Panel (LCP)
You can view MSD system status and perform some control functions from the
local control panel on the front of the instrument.
Functions available through the local control panel include:
• Prepare to vent (cool analyzer and turn off high vacuum pump)
• Monitor MSD status
• Run autotune
• Run method
• Run sequence
• View and set analyzer temperatures
See also
The G1701EA GC/MSD ChemStation Getting Started manual.
Power switch
The power switch is part of the electronics module and is located on the lower
left of the front of the MSD. It is used to turn the MSD and foreline pump on
and off.
Do not switch the MSD off unless it has completed the vent program. Incorrect
CA UT IO N
shutdown can seriously damage the MSD.
5975 Series MSD Troubleshooting and Maintenance Manual
8
Electronics
217