9.3.3
Configuration Modem
Use the 'Config Mdm' pages to configure the Modulator, Demodulator, and installed interfaces
(e.g., EIA-530, HSSI, Balanced and Unbalanced G.703, Gigabit Ethernet, Network Processor,
and LVDS). Click Page 1, Page 2, Page 3, CnC, Spreading, or AUPC to continue.
The 'Page 4' hyperlink opens a non-functioning web page. Its features
are not available to SLM-5650A Base Modem users.
9.3.3.1
Config Mdm | Page 1 (Modem Config)
Use this page to configure modem configuration parameters including Modem Operating Mode;
Transmit/Receive; and Tx Power Level.
Click [Submit] as needed in each section to save any changes.
Base Modem HTTP Interface Operation
Figure 9-6. Config Mdm | Page 1 (Modem Config) Page
9–11
SLM-5650A Satellite Modem
Revision 10
MN-SLM-5650A