Comtech EF Data SLM-5650A Installation And Operation Manual page 98

Hide thumbs Also See for SLM-5650A:

Table of Contents

Refresh the Admin | Upgrade page and verify that the newly-uploaded firmware is reported in the

proper Network Processor Firmware Info Image slot.

If not, open the Admin | Reboot page and then, in the Network Processor Boot From section, use

the drop-down menu to select Newest as needed to force the NP Module to boot using the firmware

with the most recent build date. Click [Submit] when done.

Firmware Update

During the upload process, the page displays a transfer progress bar that provides the

scrolling percentage of completion. During transfer, the message Please Wait... displays:

Upon successful completion of transfer, the progress bar reads 100%, and the Image

Upgrade Complete message displays:

Click [OK] to exit the Image Upgrade page and return to the Admin | Upgrade page.

Save all settings before rebooting to prevent loss of configuration settings.

Go to the Save Configuration page, then click [Save Now]:

SLM-5650A Satellite Modem

MN-SLM-5650A

Chapters

Table of Contents