Comtech EF Data SLM-5650A Installation And Operation Manual page 291

SLM-5650A Satellite Modem
Revision 10
Figure B-4. Doppler Shift
If the two earth stations are configured as master/slave, then the buffer need only be configured
for Doppler operation. The buffer will then have sufficient capacity for the Doppler shift on the
outward and return paths.
A buffer set up for Doppler operation only will typically require less depth than one intended for
both Doppler and plesiochronous operation.
Appendix B B–21 MN-SLM-5650A