Install The Optional Bearingless Rack Slide Set; Figure 3-4. Optional Bearingless Rack Slide Set Installation - Comtech EF Data SLM-5650A Installation And Operation Manual

3.2.2

Install the Optional Bearingless Rack Slide Set

CEFD Part Number
FP/SL0006
You may install the optional FP/SL0006 Bearingless Rack Slide Set into the equipment rack
cabinet and onto the sides of the SLM-5650A, as shown in Figure 3-4.
:
Do these steps
1. Use the provided hardware (not shown) to install one slide onto each side of the
SLM-5650A chassis.
2. Use the provided hardware (not shown) to install the slide rail components into each interior
side of the equipment rack cabinet.
3. Install the unit into the front of the equipment rack. Ensure that the slides properly engage
the cabinet-mounted slide rails.
4. Continue to slide the modem into the equipment rack to its final operating position. Then,
use four user-provided screws to secure the modem to the equipment rack's right and left
threaded front rails (through the front panel slots).
Installation

Figure 3-4. Optional Bearingless Rack Slide Set Installation

Description
Bearingless Rack Slide Set – 26"
3–6
SLM-5650A Satellite Modem
Revision 10
MN-SLM-5650A