Comtech EF Data SLM-5650A Installation And Operation Manual page 395

Menu
Options/Fields
FAST Feature
Code
Security
SNMP
Restore Factory
Defaults
Set Time
Event Log
Boot Network
Processor From [#]
Boot Base Modem
From [#]
Reboot Now
Appendix E
Entry
F Displays currently installed FAST options.
A Allows you to set admin user name and password, and set IP Interface Security Mode.
P Displays SNMP configuration parameters.
Allows you to restore NP card to factory default configuration settings.
This Reset selection only resets the NP Card. The Base
D
Modem and TRANSEC (if installed) are not reset using this
Reset selection.
Allows you to configure automatic time synchronization through Network Time Protocol
T
(NTP).
E Displays summary of faults and events.
Prompts you to enter NP boot image:
1 – Image 1
N
2 – Image 2
3 – Newest
Prompts you to enter modem boot image:
M 1 – Image 1
2 – Image 2
R Prompts you to enter Y to reboot, N to exit command without rebooting.
E–73
SLM-5650A Satellite Modem
Description
Revision 10
MN-SLM-5650A