Comtech EF Data SLM-5650A Installation And Operation Manual page 101

7 Update the TRANSEC Module bulk firmware:
8 Wait while the file transfers.
Firmware Update
b. To log in to the secure interface, select Crypto Officer from the navigation list that is
provided in the upper left-hand corner of each page, then click [Go!].
When prompted, enter the User Name and Password at the Login page:
c.
Factory Default User Name is comtech
•
Factory Default Password is comtech
•
a. Open the Admin | Update Firmware page.
In the Bulk Firmware Upload section of the page, locate the update file downloaded
b.
earlier to the User PC temporary folder:
Click [Browse]. The Choose File dialog box will open
•
Locate the folder created for the file download; double-click on the folder name
•
to open the folder.
c. Select the update file, and then click [Open]. The filename should appear in the Upgrade
Bulk File text box.
d. Click [Upload] to begin the Firmware Application Process.
After [Upload] is clicked, the Firmware Application Process page appears while the
a.
TRANSEC Module transfers, then uploads, the update file from the User PC.
Allow sufficient time for the file to be uploaded – approximately five minutes is required
b.
for the process to be completed. During the upload process, the page displays a transfer
progress bar that provides the scrolling percentage of completion. During transfer, the
message Please Wait... displays:
5–21
SLM-5650A Satellite Modem
Revision 10
MN-SLM-5650A