Comtech EF Data SLM-5650A Installation And Operation Manual page 127

(CONFIG:) Rx  CnC  Acquisition
CnC Acquisition: Range: 60.000 KHz
Use the arrow keys to select Range or Reacq. Press [ENT].
Option
Range
Reacq
Use Method 1 or Method 2 to configure these options:
Method
1
2
(CONFIG:) Rx  CnC  SearchDelay
CnC Search Delay:
Set the Minimum Delay and Maximum Delay values to use when searching for the
Interfering Carrier. Use the arrow keys to select Min or Max. Press [ENT].
Use Method 1 or Method 2 to configure either option:
Method
Front Panel Operation
Reacq: 120 Sec
CnC Interfering Carrier Frequency Offset Search Range:
0-60 kHz (in 1 Hz steps).
Holdoff time before the demodulator starts a new search.
Key in the desired value using the numbered keypad. Press [ENT].
Use the  arrow keys to select a digit to edit, and then use the  arrow keys to
change that digit. Press [ENT].
Min: 000 mSec
Max: 290 mSec
1 Key in the desired value using the numbered keypad. Press [ENT].
2
Use the  arrow keys to select a digit to edit, and then use the  arrow
keys to change that digit. Press [ENT].
(E)
Settings
Procedure
(E)
Procedure
7–21
SLM-5650A Satellite Modem
Revision 10
MN-SLM-5650A