Use Windows Command-Line Or Command Prompt To Make A Folder - Comtech EF Data SLM-5650A Installation And Operation Manual

Hide thumbs Also See for SLM-5650A:

Table of Contents

Use Windows Command-line or Command Prompt to Make a

Select Start on the Windows taskbar and then do these steps:

Click Run... to open the Run window (or, depending on Windows OS version prior to Windows 95,

click the MS-DOS Prompt icon from the Main Menu)

Open a Command-line window:

From the c:\> prompt, type either "mkdir temp" or "md temp" (both "mkdir" and "md" mean "make

directory"), and then press Enter.

There will now be a "temp" folder created and available for placement of the firmware

file download.

Firmware Update

For Windows 95 or Windows 98 – type "command".

For any Windows OS versions later than Windows 98 – type "cmd" or "command".

Alternately, from Start, select the All Programs > Accessories popup submenu, and

then select Command Prompt:

SLM-5650A Satellite Modem

MN-SLM-5650A

Chapters

Table of Contents

Do you have a question about the SLM-5650A and is the answer not in the manual?