(CONFIG:) Remote SerialConfig Format
Local M&C Bus Format:
Use the arrow keys to select the character format 7N1, 7E1, 7O1, 7N2, 7E2, 7O2,
8N1 (default), 8E1, 8O1, 8N2, 8E2, or 8O2. Press [ENT].
(CONFIG:) Remote SerialConfig Baudrate
Local M&C Bus Baud Rate:
Use the arrow keys to select a Baud Rate of 2400, 4800, 9600, 19200, 38400
(default), 57600, or 115200. Press [ENT].
(CONFIG:) Remote EthernetConfig
Ethernet Config: IP Address/Range
SNMP
Option Card Addr
Use the arrow keys to select IP Address/Range, MAC, Gateway, SNMP, or Option Card
Addr. Press [ENT].
See Sections 7.2.3.10.1 and 7.2.3.10.2 for detailed information about
using the (CONFIG:) Remote
Remote
(CONFIG:) Remote EthernetConfig IP Address/Range
Ethernet IP Address/Range:
192.168.001.005/24
To enter the IP Address and range (subnet mask), use the arrow keys to select a digit, and
then the arrow keys to change that digit. Press [ENT].
(CONFIG:) Remote EthernetConfig MAC
Modem MAC Address: 00-00-B09-000-FC-00
The modem's MAC address is programmed at the factory and is not user changeable. If installed,
the Gigabit Ethernet Interface's MAC Address also displays on this screen.
Front Panel Operation
8N1
38400 Baud
(E)
EthernetConfig
Option Card Addr menu screens.
(E)
7–31
(E)
(E)
MAC
Gateway
EthernetConfig
SNMP and (CONFIG:)
(E)
SLM-5650A Satellite Modem
Revision 10
MN-SLM-5650A