Comtech EF Data SLM-5650A Installation And Operation Manual page 252

10.3.8 Gigabit Ethernet Interface Commands and Queries
The instruction codes that follow are valid only when the optional 10/100/1000 BaseT Gigabit Ethernet Interface (GBEI) Module is installed
in the SLM-5650A Satellite Modem.
Controller-to-Target
Instruction Code and
Qualifier
Parameter
Type
Command Query
GigaBit Ethernet GIP= GIP?
Interface
Management IP
Address and
Subnet Mask
Serial Remote Control
Arguments
for Command
(Note that all arguments are ASCII numeric codes from 48 to 57)
or Query
18 bytes Command or Query.
Sets or returns the Management IP Address and Subnet Mask for the
GBEI Module, in the form aaa.bbb.ccc.ddd.ee, where:
aaa.bbb.ccc.ddd = IP Address, and
ee = Subnet Mask (0-31)
Example: <0001/GIP=010.006.030.001.24{CR}
Description of Arguments
10–58
SLM-5650A Satellite Modem
Revision 10
Target-to-Controller
Response to Query
Response to
(see Description of
Command
Arguments)
N/A GIP=aaa.bbb.ccc.ddd.
ee
MN-SLM-5650A