Figure 8-6. Cli Session Examples - Comtech EF Data SLM-5650A Installation And Operation Manual

Hide thumbs Also See for SLM-5650A:

Table of Contents

To initiate a SSH CLI session, do these steps:

1. From the SSH terminal emulation program's folder, double-click the program filename

(e.g., putty.exe), shortcut, icon, etc. to open the SSH application and its configuration

2. (Using PuTTY as the example program) Type in the IP address of the NP Module or

TRANSEC Module interface (in the example to the right, the Host Name (or IP Address)

window) and select SSH as the Connection Type.

3. Click Open to open the session. The session login window will appear as per Figure 8-6

(left). The default for both user name and password is comtech.

4. Once the login is accepted, you are granted access to the CLI as per Figure 8-6 (right).

Ethernet Interface Operation

Figure 8-6. CLI Session Examples

SLM-5650A Satellite Modem

MN-SLM-5650A

Table of Contents

Do you have a question about the SLM-5650A and is the answer not in the manual?