Config:) Tx - Comtech EF Data SLM-5650A Installation And Operation Manual

Hide thumbs Also See for SLM-5650A:

Table of Contents

(CONFIG:) Tx

Tx: Mod DataRate Overhead Frequency

Power Clocking Misc Spreading (E)

Use the  arrow keys to select a Tx configuration submenu. Press [ENT]:

Select: FEC; Type; Rate; RS; Diff; Scrambler.

Enter a selected data rate and view the symbol rate (see Appendix B. OPERATIONAL

REFERENCES).

Select the Overhead Type; view the Overhead Rate; select the Reed-Solomon Code Word; set the

Select the desired frequency and spectral inversion.

Select desired output power level and state of the output.

Select the transmit clock source and SCT reference.

Select CLK/DataPhase and BPSK Bit Ordering.

Select the Tx spreading factor and equation. View the Tx Chip Rate. This menu is selectable

only if the "Modem Type" has been set to LDPC.

Front Panel Operation

See Appendix J. OVERHEAD AND SYMBOL RATE CALCULATIONS for

information about Overhead bandwidth.

SLM-5650A Satellite Modem

MN-SLM-5650A

Table of Contents