Ndp Config - TP-Link TL-SL3428 User Manual

The following entries are displayed on this screen:
Inqdcn"Eqphki"
"
PFR<"
Cikpi"Vkog<"
Jgnnq"Vkog<"
Rqtv"Eqphki"
"
Ugngev<"
Rqtv<"
PFR<"
Gpcdng<"
Fkucdng<"
Pqvg<"
1. NDP function is effective only when NDP function is enabled globally and for the port.
Figure 13-4 NDP Config
Select Enable/Disable NDP function globally.
Enter the period for the neighbor switch to keep the NDP packets
from this switch.
Enter the interval to send NDP packets.
Select the desired port to configure its NDP status.
Displays the port number of the switch.
Displays NDP status of the current port.
Click the Enable button to enable NDP for the port you select.
Click the Disable button to disable NDP for the port you select.
186