Ndp Config - TP-Link TL-SG3210 User Manual

Detail：

13.1.3 NDP Config

On this page you can configure the NDP function for the switch.
Choose the menu Cluster→NDP→NDP Config to load the following page.
The following entries are displayed on this screen:
Global Config

NDP:
Aging Time:
Hello Time:
Port Config

Select:
Port:
NDP:
Click the Detail button to view the complete information collected
for the port.
Figure 13-4 NDP Config
Select Enable/Disable NDP function globally.
Enter the period for the neighbor switch to keep the NDP packets
from this switch.
Enter the interval to send NDP packets.
Select the desired port to configure its NDP status.
Displays the port number of the switch.
Displays NDP status of the current port.
191