Maintenance; Resetting; D Partial Reset - Icom ID-31E PLUS Basic Manual

9

MAINTENANCE

■ Resetting

Occasionally, erroneous information is displayed when,
for example, first applying power. This may be caused
externally by static electricity or by other factors.
If this problem occurs, perform a Partial reset or an All reset.
BE CAREFUL! An All reset clears all programming and
returns all settings to their factory defaults. (Section 10 of
ADVANCED MANUAL)
After All resetting, you cannot use the DR function
because the Repeater List contents are also cleared.

D Partial Reset

MENU > Others > Reset
1. Push [MENU].
2. Select "Others."
3. Select "Reset."
31
BASIC MANUAL
[Up]
[ENT]
[Down]
4. Select "Partial Reset."
• The confirmation dialog "Partial Reset?" is displayed.
5. Select <YES>.
6. "PARTIAL RESET" is displayed, and then the display
automatically returns to the default screen.
TIP: A Partial Reset resets the operating settings to their
defaults without clearing the following:
• Memory channel contents • Call channel contents
• Message data • GPS memory contents
• Scan Edge contents • Call sign memories
• DTMF memory contents • Repeater list