Recording A Qso Onto A Microsd Card; About The Microsd Card - Icom ID-31E PLUS Basic Manual

6

RECORDING A QSO ONTO A microSD CARD

■ About the microSD card

NOTE: The microSD and microSDHC cards are not
available from Icom (User supplied).
A microSD card of up to 2 GB, or a microSDHC of up to
32 GB, can be used with this transceiver.
Icom has checked the compatibility with the following cards.
Brand
SanDisk ®
• The performance of the cards listed above is not guaranteed.
• Throughout this document, the microSD card and microSDHC
card are simply called microSD cards or the cards.
• Before using the microSD card, format the card using the
transceiver, even preformatted for PCs or other uses. (p. 8)
TIP: Saving the factory default data is recommended.
(MENU > SD Card > Save Setting) (p. 9)
23
BASIC MANUAL
(As of October 2017)
Type Memory size
2 GB
microSD
4 GB
8 GB
microSDHC
16 GB
32 GB
NOTE:
• Before using the microSD card, thoroughly read the
instructions of the card.
• If you do any of the following, the card data may be
corrupted or deleted.
- You remove the card from the transceiver while
accessing the card.
- You change the external power supply's voltage while
accessing the card.
- You drop, impact or vibrate the card.
• DO NOT touch the contacts of the card.
• The transceiver takes a longer time to recognize a high
capacity card.
• The card will get warm if used continuously for a long
period of time.
• The card has a certain lifetime, so data reading or writing
may not be possible after using it for a long period of
time.
• When reading or writing data is impossible, the card's
lifetime has ended. In this case, purchase a new one.
We recommend you make a backup file of the important
data onto your PC.
• Icom will not be responsible for any damage caused by
data corruption of a card.