Maintenance; Troubleshooting - Icom IC-4SA: IC-4SE: Instruction Manual

PO
MAINTENANCE © MN
6-1 Troubleshooting
can be used. status. [FUNC].
e Set in VFO or MEMORY mode.
e Rotate [SQL] clockwise.
e While pushing [LIGHT] and [V/M], turn
power ON.
e Scan does not operate. e Call channel is selected.
e Squelch is open.
e [he transceiver is in the special operating
condition.
eThe transceiver is in the special operating
condition.
e The [C] switch cannot call
the call channel.
e While pushing [LIGHT] and [V/M], turn
power ON.
e The contents of the memories e The backup battery is exhausted because no
are erased. charging has been performed for a long time.
e Charge the battery pack (backup battery is
charged simultaneously).