Selecting A Memory Channel - Icom ID-31E PLUS Basic Manual

6. Hold down [S.MW] for 1 second to save the Memory
contents.
•  B eepssoundandtheMemorycontentsarebrieflydisplayed,
then returns to the VFO mode.
▼
TIP:
• You can also save the Memory contents to another
channel by selecting:
• 00A/00B ~ 24A/24B: Saves to the Program channel
• C0, C1: Overwrites to the Call channel
• VFO: Overwrites to the VFO
• To enter content into the selected channel, see Section 7
of ADVANCED MANUAL for details.
MEMORY OPERATION

■ Selecting a Memory channel

In the Memory mode, you can select the Memory channels
by rotating [DIAL].
1. Push [M/CALL] several times to enter the Memory
mode.
L Pushing [M/CALL] each time selects the VFO and Memory
modes.
2. Rotate [DIAL].
• Selects a Memory channel.
L Blank channels are not selected.
5
Memory mode is selected.
BASIC MANUAL
6
22