Memory Operation; Entering Memory Channels; Memory Channel Memory Channel Operation - Icom ID-31E PLUS Basic Manual

5

MEMORY OPERATION

■ Entering Memory channels

The transceiver has a total of 500 Memory channels to save
often-used frequencies.
In the Memory mode, you can quickly select the saved
memories. This section describes the basic channel content
entry.
Example: Entering 441.600 MHz/FM mode into the Memory
channel 011.
1. Push [V/MHz] to enter the VFO mode.
2. Push [FM/DV] to enter the FM mode.
3. Rotate [DIAL] to set a frequency to 441.600 MHz.
21
BASIC MANUAL BASIC MANUAL
4. Hold down [S.MW] for 1 second to enter the Select
Memory Write mode.
• A short and a long beep sound.
• The Memory channel number blinks and the Memory
contents are displayed.
5. Rotate [DIAL] to select Memory channel 11.
Blinks
Blinks