Register Your Call Sign At A Gateway Repeater - Icom ID-31E PLUS Basic Manual

INTRODUCTION

■ Register your call sign at a gateway repeater

To make a Gateway call through the Internet, you must
register your call sign at a repeater that has a gateway,
usually one near you.
About the registration process described:
This section describes the call sign registration process at
a repeater that is connected to the US Trust server.
There are other systems as well, and they have their own
registration process. For information on how to register on
one of them, contact the administrator of a repeater that
uses the alternate system.
NOTE: If needed, ask the gateway repeater administrator
for call sign registration instructions.
41
D-STAR GUIDE
Step 1: Access the call sign registration screen
1. Access the following URL to find the gateway repeater
closest to you.
http://www.dstarusers.org/repeaters.php
2. Click the call sign of the repeater that you want to
register to.
3. Click the "Gateway Registration URL:" link address.
4. The "D-STAR Gateway System" screen is displayed.
Click <Register> to start the New User registration.
Click