Initial Setup; Initial Setup; Attaching The Battery Pack - Icom ID-31E PLUS Basic Manual

2

INITIAL SETUP

Before starting using the transceiver, follow these steps for
an initial setup.
Attach the battery pack, and charging the battery.
STEP 1
(pp. 5, 6)
Insert a microSD card. (p. 7)
STEP 2
Turn ON the transceiver. (p. 7)
STEP 3
Adjust the audio level. (p. 7)
STEP 4
Save your initial setting onto a microSD card.
STEP 5
(p. 8)
Receiving GPS data. (p. 10)
STEP 6
* Enter your Call sign (MY) into the transceiver.
STEP 7
(p. 39)
* Register your call sign at a Gateway repeater.
STEP 8
(p. 41)
► You have completed the steps!!
* You can skip the step if you do not operate D-STAR right now.
5
BASIC MANUAL

■ Attaching the Battery pack

Attach or detach the battery pack or battery case, as
illustrated below.
To attach
w
q
Battery pack or
battery case
L Illustrations of the battery pack
NOTE: Even when the transceiver is OFF, a small current
still flows in the transceiver. Remove the battery pack
or case from the transceiver when not using it for a long
time. Otherwise, the batteries in the pack or the case will
become exhausted.
When the temperature is around 0°C (32°F) or below,
the Battery Protection function automatically sets the
transceiver power to Low1 power (0.5 W), and disables
power selections High, Mid, and Low2.
To detach
q
q
w