Enter Your Call Sign (My) Into The Transceiver - Icom ID-31E PLUS Basic Manual

INTRODUCTION

■ Enter your call sign (MY) into the transceiver

To operate D-STAR, you must first enter your call sign into
the MY call sign memory. You can enter up to 6 MY call
signs, into MY call sign memory [MY1] ~ [MY6].
NOTE: Your MY call sign must match the call sign
registered on a gateway repeater. (p. 41)
Example: Enter "JG3LUK" as your own call sign into [MY1].
Step 1: Display the MY CALL SIGN edit screen
MENU > My Station > My Call Sign
1. Push [MENU].
2. Select "My Station."
3. Select "My Call Sign."
39
D-STAR GUIDE
[Up]
[ENT]
[Down]
4. Select MY call sign memory, then push [QUICK].
5. Select "Edit."
• Displays the MY CALL SIGN edit screen.
Step 2: Enter and set your own call sign
1. Enter your own call sign, then push [ENT].
2. Select the entered call sign, then push [ENT].
• Sets the call sign to be used as MY call sign.
L To exit the MENU screen, push [MENU].
(Example: "1:")
L See "How to enter characters:"
on the right page.