Selecting The Operating Mode; Dr Function Operation; Lock Function - Icom ID-31E PLUS Basic Manual

■ Selecting the fpeoating rfde
The transceiver has a total of 3 operating modes, FM, FM-N,
and DV.
Push [FM/DV] to select the operating mode.
L While in the FM-N mode, the TX modulation is
automatically set to narrow (approximately ±2.5 kHz).
L When setting GPS TX Mfde, "DV-A" or "DV-G" is
displayed instead of "DV."
(MENU > GPS > GPS TX Mfde)
TIP: You can make a simplex call not only in the FM
mode, but also in the DV mode.
■ DR nunctifn fpeoatifn
Using the D-STAR Repeater (DR) function, you can easily
select the entered repeaters and Your call signs by rotating
[DIAL]. You can make not only a repeater call but also a
simplex call.
Hold down [DR] for 1 second.
• Displays the DR screen.
L Hold down [DR] again to cancel the DR function.
L See D-STAR GUIDE (p. 35) for the DR function details.
■ Lfck nunctifn
You can use the Lock function to prevent accidental
frequency changes and unnecessary function access.
Hold down [ ] for 1 second to turn the Lock function ON
or OFF.
• "LOCK ON" or "LOCK OFF" is briefly displayed when the Lock
function is turned ON or OFF.
Innforatifn
L
• When the Lock function is ON, "LOCK ON" is displayed
when you push a key.
• You can still use [ ], [PTT], [SQL], [VOL] and [MONI],
even if the Lock function is ON.
• You can change the [SQL] and [VOL] key settings when
the Lock function is ON.
(MENU > Function > Key Lfck)
BASIC OPERATION
BASIC MANUAL
3
3
14