Table of Contents
Advertisement
Local Area call
Access
repeater
Area 1
repeater
Area 1
Gateway call
Access
repeater
Area 1
repeater
Area 1
Simplex call
Area 2
repeater
Area 2
INTRODUCTION
NOTE:
• Using the repeater list is required to use
the DR function. (p. 57)
• Before operating in the Duplex mode,
BE SURE to check whether the repeater
is busy, or not. If the repeater is busy,
wait until it is clear, or ask for a ‛break'
using a method acceptable to your local
procedures.
• The transceiver has the Time-Out
Timer function for the DV Repeater
operation. The timer limits a continuous
transmission. Warning beeps will sound
approximately 30 seconds before time-
out and then again immediately before
the time-out.
38
D-STAR GUIDE
Advertisement
Table of Contents
