Selecting The Frequency Selecting Mode - Icom ID-31E PLUS Basic Manual

3
BASIC OPERATION
■ Selecting the Foequency Selecting rfde
D VFO rfde
Rotate [DIAL] to set an operating frequency.
D Merfoy rfde
Select a Memory channel where an operating frequency and
other parameters are saved.
L In the Memory mode, "
are displayed.
D Call Channel rfde
Select a Call channel to quickly recall your most-often used
frequencies.
L In the Call Channel mode, "C0" or "C1" is displayed.
[DIAL]
13
BASIC MANUAL
" and Memory Channel number
Push to select the VFO mode.
Push to select the Memory mode
or the Call Channel mode.
1. Select a mode.
Innforatifn
L
• Push [V/MHz] to select the VFO mode.
• In the VFO mode, push [V/MHz] to select 1 MHz tuning step.
VFO mode
• Push [M/CALL] to select the Memory mode or the Call
Channel mode.
Memory mode
2. Rotate [DIAL] to select an operating frequency or a
channel.
Call Channel mode