Quick Menu Window - Icom ID-31E PLUS Basic Manual

■ Quick Menu windfw
You can open the Quick Menu window by pushing [QUICK].
In the window, the selectable items may differ, depending on
the operating mode or function. The items listed below are
examples.
VFO rfde Merfoy rfde Call CH rfde
DUP Bank Select
TONE* DUP
TS TONE*
DTMF TX TS
Voice TX SKIP
GPS Information DTMF TX
GPS Position Voice TX
PRIO Watch GPS Information PRIO Watch
Home CH Set GPS Position
Voltage PRIO Watch
Band Scope Home CH Set
<<REC Start>> Display Type
<<GPS Logger
Voltage
Only>>
Band Scope
<<REC Start>>
<<GPS Logger
Only>>
* "DSQL" is displayed in the DV mode.
DR nunctifn
DUP Group Select
TONE* Repeater Detail
TS DTMF TX
DTMF TX Voice TX
Voice TX GPS Information
GPS Information GPS Position
GPS Position PRIO Watch
Display Type
Display Type DSQL
Voltage SKIP
Band Scope Home CH Set
<<REC Start>> Voltage
<<GPS Logger
<<REC Start>>
Only>>
<<GPS Logger
Only>>
D Quick Menu windfw fpeoatifn
[Up]
[ENT]
[Down]
Simplified description—'Select' operation
In this manual, user's 'Select' operation is simplified, as
described below.
Simplified description:
1. Push [QUICK].
2. Select "TS."
Opeoatifn:
1. Push [QUICK] to open the Quick Menu window.
2. Push [Up] (RX→CS) or [Down] (DR) to select "TS."
BASIC OPERATION
[Up]
[ENT]
[Down]
BASIC MANUAL
3
3
12