Table of Contents
Advertisement
2
INITIAL SETUP
■ Saving a setting data onto a microSD card
D Saving a setting data
You can save the Memory channels, Menu screen item
settings, and repeater lists on a microSD card.
Saving settings on a card enables you to easily restore the
transceiver to its previous settings, even if you perform an
All Reset.
TIP: The setting data are saved in the "icf" file format that
is used in the CS-31PLUS
saved data on a card is copied to a PC, you can edit it
with the software.
MENU > SD Card > Save Setting
1.
Push [MENU].
2. Select "SD Card."
3. Select "Save Setting."
9
BASIC MANUAL
. When the
cloning software
[Up]
[ENT]
[Down]
4.
Select "<<New File>>."
• Displays the FILE NAME screen.
L The file name is automatically named in the following
manner: Setyyyymmdd_xx (yyyy: Year, mm: month, dd: day,
xx: serial number).
Example: If a second file is saved on November 1, 2017, the
file is named "Set20171101_02."
5. Push [ENT].
6. Select <YES>.
• Saves the data settings.
L While saving, a progress bar is displayed, then returns to
the SD CARD screen after the saving is completed.
L To exit the MENU screen, push [MENU].
Advertisement
Table of Contents
