Table of Contents
Advertisement
D Linking to a reflector
If your repeater is not currently linked to a reflector, or if
you want to change it to another reflector, follow the steps
below. Before linking to another reflector, BE SURE to
unlink the current reflector. (p. 53)
Direct inputting a reflector
Example: Directly enter "REF030CL."
1.
Push [RX→CS] to select "TO," then push [ENT].
2. Select "Reflector."
3. Select "Link to Reflector."
[Up]
[ENT]
[Down]
4.
Select "Direct Input."
5. Rotate [DIAL] to select the reflector number.
Blinks
6. Push [CS] to move the cursor to the right box.
7.
Rotate [DIAL] to select the module letter.
Blinks
8. Push [ENT].
• Returns to the DR screen, and "Link to Reflector" and
"REF030CL" are displayed in "TO."
9.
Hold down [PTT] to link to the reflector.
• The TX/RX indicator lights red while transmitting.
D-STAR OPERATION
( Example: 030)
( Example: C)
D-STAR GUIDE
54
Advertisement
Table of Contents
