Selecting The Operating Band; D Selecting The Operating Band On The Keypad; D Selecting The Operating Band On The Screen; Selecting The Operating Mode - Icom IC-7610 Basic Manual

3
BASIC OPERATION

Selecting the operating band

D Selecting the operating band on the
keypad
(Example: Selecting 14 MHz in the Main band.)
1. Touch the Main band's frequency readout.
2. Push on the band keypad.
14
Keypad
• The 14 MHz band frequency is displayed.
D Selecting the operating band on the
screen
(Example: Selecting 21 MHz in the Main band.)
1. Touch the MHz digits to display the BAND
STACKING REGISTER screen.
2. Touch [21].
About the Band Stacking Register:
The band stacking register provides 3 memories for
each band key to store frequencies and operating
modes.
Sequentially select the registered memories:
z Repeatedly push a band key on the keypad.
z Repeatedly touching a band key on the BAND
STACKING REGISTER screen for 1 second.

Selecting the operating mode

You can select the SSB, CW, RTTY, PSK, AM, or FM
modes.
1. Touch the mode icon.
2. Touch the mode key.
L In the SSB, AM or FM mode,
the [DATA] key is displayed.
• Operating mode selection list
Mode key
[SSB]
[CW]
[RTTY]
[PSK]
[AM]
[FM]
[DATA]
Selecting the Data mode
You can operate in the data mode in the SSB, AM and
FM modes. The Data mode enables you to operate
these modes without input from the microphone, even
if the microphone is connected.
L When the data mode is selected, you can select the
connector(s) modulation signal. (p. 8-6)
» SET > Connectors >
MENU
DATA1 MOD ~ DATA3 MOD
(Example: USB-D mode)
1. While the USB mode is selected, touch the mode
icon.
2. Touch [DATA].
• [USB-D1] is displayed.
TIP: See the Advanced Manual for details on using
the Data mode.
3-3
Operating mode
LSB USB
CW CW-R
RTTY RTTY-R
PSK PSK-R
AM
FM
LSB LSB-D
USB USB-D
AM AM-D
FM FM-D