• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
• If an action step is preceded by "(Trained technician only)," that step must be performed only by a trained
technician.
• Go to the support website at
and new device drivers or to submit a request for information.
Symptom
A cover latch is broken, an LED
is not working, or a similar
problem has occurred.
The server is hung while the
screen is on. Cannot start the
Setup utility by pressing F1.
Hard disk drive problems
Use this information to solve hard disk drive problems.
http://www.lenovo.com/support
Action
If the part is a CRU, replace it. If the part is a microprocessor or the system board,
the part must be replaced by a trained technician.
1. See "Nx-boot failure" on page 166 for more information.
2. See "Recovering the server firmware (UEFI update failure)" on page 164 for
more information.
to check for technical information, hints, tips,
Chapter 4
.
141
Troubleshooting