Figure 67. Installation tool alignment
d.
Install the microprocessor using the following instructions for your installation tool.
• If using Installation Tool A, twist the handle on the microprocessor tool assembly
counterclockwise to the open position to insert the microprocessor into the socket, and lift
the installation tool out of the socket.
• If using Installation Tool B, twist the handle of the installation tool assembly
counterclockwise until the microprocessor is inserted into the socket, and lift the installation
tool out of the socket. The following illustration shows the tool handle in the open position.
Figure 68. Installation Tool B
E5-x6xx
E5-x6xx v2
.
Chapter 2
Installing optional devices
79