Lenovo System x3550 M4 Installation And Service Manual page 756

Complete the following steps:
1. Check component firmware level and upgrade if necessary. The installed firmware level can be
found in the DSA Diagnostic Event Log within the Firmware/VPD section for this component.
2. Rerun the test.
3. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service
Guide" for the next corrective action.
Related links
–
IBM Support website
–
Latest level of DSA
– Latest level of BMC/IMM
• 405-904-000 : BRCM:TestInterrupt Test Failed
A failure was detected while testing interrupts.
Recoverable
No
Severity
Error
Serviceable
Yes
Automatically notify support
No
User Response
Complete the following steps:
1. Check component firmware level and upgrade if necessary. The installed firmware level can be
found in the DSA Diagnostic Event Log within the Firmware/VPD section for this component.
2. Rerun the test.
3. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service
Guide" for the next corrective action.
Related links
–
IBM Support website
– Latest level of DSA
–
Latest level of BMC/IMM
• 405-905-000 : BRCM:TestLoopbackMAC Test Failed
BRCM:TestLoopbackMAC Test Failed.
Recoverable
No
Severity
Error
Serviceable
Yes
Automatically notify support
No
User Response
Complete the following steps:
1. Check component firmware level and upgrade if necessary. The installed firmware level can be
found in the DSA Diagnostic Event Log within the Firmware/VPD section for this component.
742
Lenovo System x3550 M4 Installation and Service Guide