Lenovo System x3550 M4 Installation And Service Manual page 414

Hide thumbs Also See for System x3550 M4:

Table of Contents

1. Make sure that the fans are operating, that there are no obstructions to the airflow (front and rear

of the server), that the air baffle is in place and correctly installed, and that the server cover is

installed and completely closed.

2. Check the ambient temperature. You must be operating within the specifications (see Server

Features and specifications for more information).

3. Make sure that the heat sink for microprocessor n.

4. (Trained technician only) Replace microprocessor n. (n = microprocessor number)

• 80070603-0701ffff : Sensor [SensorElementName] has transitioned to non-recoverable. (Pwr Rail 1-

This message is for the use case when an implementation has detected a Sensor transitioned to non-

recoverable.

May also be shown as 800706030701ffff or 0x800706030701ffff

Automatically notify support

Alert Category

Critical - Power

SNMP Trap ID

CIM Information

Prefix: PLAT ID: 0530

User Response

If the specified sensor is one of Pwr Rail 1-6 Fault, please follow actions in "Power Problems and

Solving Power Problems".

• 80070608-0a01ffff : Sensor [SensorElementName] has transitioned to non-recoverable.