Lenovo System x3550 M4 Installation And Service Manual page 127

The following commands are examples of using the userid and password default values and not
using the default values.
Examples that do not use the userid and password default values:
asu set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model> --host <imm_ip>
--user <imm_user_id> --password <imm_password>
asu set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n> --host <imm_ip>
--user <imm_user_id> --password <imm_password>
asu set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag> --host <imm_ip>
--user <imm_user_id> --password <imm_password>
Examples that do use the userid and password default values:
asu set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model> --host <imm_ip>
asu set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n> --host <imm_ip>
asu set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag> --host <imm_ip>
• Bootable media:
You can also build a bootable media using the applications available through the ToolsCenter
website at
https://support.lenovo.com/us/en/ documents/LNVO-CENTER
page, scroll down for the available tools.
Step 5. Restart the server.
. From the ToolsCenter
. 113
Chapter 3 Configuring