Lenovo System x3550 M4 Installation And Service Manual page 424

2. Update the firmware (UEFI and IMM) to the latest level (Updating the firmware).
3. Run the DSA program.
4. Reseat the adapter.
5. Replace the adapter.
6. (Trained technician only) Replace microprocessor n.
7. (Trained technician only) Replace the system board. (n = microprocessor number)
• 806f0008-0a01ffff : [PowerSupplyElementName] has been added to container
[PhysicalPackageElementName]. (Power Supply 1)
This message is for the use case when an implementation has detected a Power Supply has been added.
May also be shown as 806f00080a01ffff or 0x806f00080a01ffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0084
User Response
No action; information only.
• 806f0008-0a02ffff : [PowerSupplyElementName] has been added to container
[PhysicalPackageElementName]. (Power Supply 2)
This message is for the use case when an implementation has detected a Power Supply has been added.
May also be shown as 806f00080a02ffff or 0x806f00080a02ffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0084
User Response
No action; information only.
• 806f0009-1301ffff : [PowerSupplyElementName] has been turned off. (Host Power)
410
Lenovo System x3550 M4 Installation and Service Guide