Lenovo System x3550 M4 Installation And Service Manual page 318

Hide thumbs Also See for System x3550 M4:
Table of Contents

Advertisement

Figure 243. Fan assembly bracket rotation
Step 5.
Install the hot-swap fans (see "Replacing a hot-swap fan" on page 244).
Step 6.
Install the system battery (see "Replacing the system battery" on page 270).
Step 7.
(Trained technician only) Install the microprocessor and heat sink (see "Replacing a microprocessor
and heat sink" on page 288).
Step 8.
Install the memory modules (see "Installing a memory module" on page 217).
Step 9.
Install the ServeRAID SAS/SATA controller (see "Replacing a ServeRAID SAS/SATA controller" on
page 233).
Step 10. Reconnect the cables to the system board.
Step 11. Install the PCI riser-card assemblies and adapters, if any were installed (see "Replacing an adapter"
on page 228 and "Replacing a PCI riser-card assembly" on page 224).
Step 12. Install the air baffle (see "Replacing the air baffle" on page 197).
Step 13. Install the cover (see "Replacing the cover" on page 195).
Step 14. Push the power supplies back into the server.
Step 15. Slide the server into the rack.
Step 16. Reconnect the power cords and any cables that you removed.
Step 17. Turn on the peripheral devices and the server.
Step 18. Start the Setup utility and reset the configuration.
• Set the system date and time.
• Set the power-on password.
• Reconfigure the server.
See "Using the Setup utility" on page 95 for more details.
Step 19. Either update the server with the latest RAID firmware or restore the pre-existing firmware from a
diskette or CD image.
Step 20. Update the UUID (see "Updating the Universal Unique Identifier (UUID)" on page 109).
Step 21. Update the DMI/SMBIOS (see "Updating the DMI/SMBIOS data" on page 111).
Step 22. Reactivate any Features on Demand features.
304
Lenovo System x3550 M4 Installation and Service Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

7914

Table of Contents