Lenovo System x3550 M4 Installation And Service Manual page 813

1. Perform the actions mentioned one at a time and try the test after each action.
2. If the problem remains, contact your technical-service representative.
3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s).
Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
Related links
– IBM Support website
–
Latest level of DSA
–
Latest level of BMC/IMM
• 201-827-000 : Standalone Memory Test Aborted
BIOS: ECC function has been disabled by BIOS. Go to Setup and enable ECC generation.
Recoverable
No
Severity
Warning
Serviceable
No
Automatically notify support
No
User Response
Complete the following steps:
1. Perform the actions mentioned one at a time and try the test after each action.
2. If the problem remains, contact your technical-service representative.
3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s).
Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
Related links
– IBM Support website
–
Latest level of DSA
–
Latest level of BMC/IMM
• 201-827-001 : Standalone Memory Test Aborted
BIOS: ECC function has been disabled by BIOS. Go to Setup and enable ECC generation.
Recoverable
No
Severity
Warning
Serviceable
No
Automatically notify support
No
User Response
Complete the following steps:
1. Perform the actions mentioned one at a time and try the test after each action.
2. If the problem remains, contact your technical-service representative.
Appendix C. DSA diagnostic test results
799