Figure 49. RAID adapter battery or flash power module installation
Note: The positioning of the battery or flash power module depends on the type of the battery
or flash power module that you install.
c.
Connect the other end of the cable to the battery or flash power module.
d.
Lower and press down on the retention clip until it snaps in place to hold the battery or flash
power module firmly in place.
If you have other devices to install or remove, do so now. Otherwise, go to "Completing the installation" on
page 86.
Installing the dual-port network adapter
You can purchase one of the following dual-port network adapters to add two additional network ports in the
server.
To order a dual-port network adapter option, contact your sales representative or reseller.
.
Chapter 2
Installing optional devices
61