Step 10. Connect the DVD drive cable (see "Replacing the DVD drive cable" on page 215). The following
illustration shows the cable routing for the DVD drive:
Figure 131. DVD drive cable routing
Step 11. Reconnect the power cords and any cables that you removed.
Step 12. Turn on the peripheral devices and the server.
Removing the DVD drive cable
Use this information to remove the DVD drive cable.
To remove the DVD cable, complete the following steps:
Step 1.
Read the safety information that begins on "Safety" on page v and "Installation guidelines" on page
31.
Step 2.
Turn off the server and peripheral devices and disconnect the power cords.
Step 3.
Remove the cover (see "Removing the cover" on page 194).
Step 4.
Remove the air baffle (see "Removing the air baffle" on page 196).
.
Chapter 6
Removing and replacing components
213