Lenovo System x3550 M4 Installation And Service Manual page 107

– Mapping the CD or DVD drive, diskette drive, and USB flash drive on a remote client, and mapping ISO
and diskette image files as virtual drives that are available for use by the server
– Uploading a diskette image to the IMM memory and mapping it to the server as a virtual drive
The blue-screen capture feature captures the video display contents before the IMM restarts the server
when the IMM detects an operating-system hang condition. A system administrator can use the blue-
screen capture feature to assist in determining the cause of the hang condition. For more information, see
"Using the remote presence and blue-screen capture features" on page 103.
• Ethernet controller configuration
For information about configuring the Ethernet controller, see "Configuring the Ethernet controller" on
page 106.
• Features on Demand software Ethernet software
The server provides Features on Demand software Ethernet support. You can purchase a Features on
Demand software upgrade key for Fibre Channel over Ethernet (FCoE) and iSCSI storage protocols. For
more information, see "Enabling Features on Demand Ethernet software" on page 106.
• Features on Demand software RAID software
The server provides Features on Demand software RAID support. You can purchase a Features on
Demand software upgrade key for RAID. For more information, see "Enabling Features on Demand RAID
software" on page 106.
• Advanced Settings Utility (ASU) program
Use this program as an alternative to the Setup utility for modifying UEFI settings and IMM settings. Use
the ASU program online or out of band to modify UEFI settings from the command line without the need to
restart the server to run the Setup utility. For more information about using this program, see "Advanced
Settings Utility program" on page 107.
• Configuring RAID arrays
For information about configuring RAID arrays, see "Configuring RAID arrays" on page 106.
The following table lists the different server configurations and the applications that are available for
configuring and managing RAID.
Table 13. Server configuration and applications for configuring and managing RAID arrays
Server configuration
ServeRAID-H1110 adapter
ServeRAID-M1115 adapter
ServeRAID-M5110 adapter
ServeRAID-M5120 adapter
Notes:
RAID array configuration (before
operating system is installed)
LSI Utility (Setup utility, press Ctrl
+C), ServerGuide, Human Interface
Infrastructure (HII)
MegaRAID BIOS Configuration
Utility (press Ctrl+H to start), pre-
boot CLI (press Ctrl+P to start),
ServerGuide, HII
MegaRAID BIOS Configuration
Utility (press Ctrl+H to start), pre-
boot CLI (press Ctrl+P to start),
ServerGuide, HII
MegaRAID BIOS Configuration
Utility (press Ctrl+H to start), pre-
boot CLI (press Ctrl+P to start),
ServerGuide, HII
RAID array management (after
operating system is installed)
MegaRAID Storage Manager (MSM),
SAS2IRCU (Command Line) Utility
for Storage Management
MegaRAID Storage Manager (MSM),
MegaCLI (Command Line Interface),
and Systems Director
MegaRAID Storage Manager (MSM),
MegaCLI, and Systems Director
MegaRAID Storage Manager (MSM),
MegaCLI, and Systems Director
.
Chapter 3 Configuring
93