Lenovo System x3550 M4 Installation And Service Manual page 847

3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s).
Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
Related links
–
IBM Support website
– Latest level of DSA
–
Latest level of BMC/IMM
• 201-878-003 : Standalone Memory Test Aborted
Sparing feature must be turned OFF. Go to setup and turn the sparing feature OFF.
Recoverable
No
Severity
Warning
Serviceable
No
Automatically notify support
No
User Response
Complete the following steps:
1. Perform the actions mentioned one at a time and try the test after each action.
2. If the problem remains, contact your technical-service representative.
3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s).
Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
Related links
– IBM Support website
–
Latest level of DSA
–
Latest level of BMC/IMM
• 201-885-000 : Standalone Memory Test Aborted
Processor does not support MTRR register manipulation. Can not write to memory without cache.
Recoverable
No
Severity
Warning
Serviceable
No
Automatically notify support
No
User Response
Complete the following steps:
1. Perform the actions mentioned one at a time and try the test after each action.
2. If the problem remains, contact your technical-service representative.
3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s).
Reconnect it to power.
Appendix C. DSA diagnostic test results
833