Settings" Menu; Interface; Colors Editor - Danfoss VLT 5000 Series Manual

I I I I I "SETTINGS" menu
This menu offers compiler options and interface
settings. You can set the colors in the editor as you
wish. If you would like to change the language of
the user interface, please see below.
I I I I I "COMPILER"
The default values for the compiler options are set
accordingly for most applications. Thus, they do
not require too much memory and, at the same
time, they allow the necessary input to be made.
Maximum number of variables
The number of variables has a direct effect on the
amount of memory available in the option. It is im-
portant to remember that an array also occupies
the space of a variable.
If you need more than 92 variables (incl. arrays)
then increase this number.
Maximum number of labels
The maximum number of labels determines how
much memory is available for internal hyperlinks.
Internal hyperlinks are automatically created for all
branches of the program (GOTO, IF, LOOP,
REPEAT, WHILE, GOSUB) during compiling. The
recommended range is between 100 and 500 inter-
nal labels.
Increase the maximum values permitted if the
number of labels is not sufficient for text input.
MG.10.J4.02 – VLT is a registered Danfoss trade mark
®
VLT 5000 SyncPos option
I I I I I "INTERFACE"
You have already determined the interface settings
while starting the VLT.
If you have to change one of the settings, for
example the baud rate, click on "SETTINGS" → → → → →
"INTERFACE" and enter the change.
NB!
However, it is important to remember that a
change in the interface settings can cause
the communication between the PC and the VLT to
be lost.
Scan Range
Define the range for scanning the connected VLTs.
If you add one or more VLTs in the network, you
have to extend the range.
RS485 connection
You need the RS232 standard interface in the PC
or an additional RS232 interface card and an
external converter for a RS485 connection.
I I I I I "COLORS EDITOR"
In order to provide greater clarity, different colors
can be assigned to the various program sections
such as comment, key word, number etc. To do
this, open the "COLORS EDITOR" in menu
"SETTINGS." Select the type, e.g. Comment, and
select the desired color. Click OK to store the new
settings.
55